Ajax uartBridge

Module for integration with third-party wireless security systems and smart home systems

A wireless network of intelligent and secure Ajax detectors can be added to a third-party security or smart home system via the UART interface.

  • Jeweler radio technology enables the expansion of the network of detectors up to 2.000 meters away in open spaces or over several floors of a business center
  • Has a system capacity of up to 85 devices
  • Uses authentication to protect against fraud
  • Jamming detection, frequency hopping
  • Uses an encrypted connection
  • Detectors can be adapted via a radio channel
  • Pings all 12-300 seconds to monitor the system
  • Provides the status of each device: alarms, battery level, current status, etc.
  • Connects via the UART interface

Specifications
Communication interface to the central unit: UART (speed 57.600 Bd)
Use: Interior
Radio signal power: 25 mW
Communication protocol: Jeweler (868.0-868.6 MHz)
Maximum distance between a wireless detector and a uartBridge receiver: Up to 2.000 m (outdoor)
Maximum number of connected devices: 85
Disruption detectionYes
Software Update: Yes
Detector performance monitoring: Yes
Supply voltage: DC 5 V (from the UART interface)
Operating Temperature Range: From -20 ° C (-4 ° F) to + 50 ° C (+ 140 ° F)
Operating humidity up to 90%
Dimensions: 64х55х13 mm (2.51 × 2.16 × 0.51 in) (without antennas); 110х58х13 mm (4.33 × 2.28 × 0.51 in) (with antennas)