Very often, existing door openers have more power consumption of over 300 mA in the case of intercom systems. Since the video spreading system outputs only max 300 mA 12 V DC, the door opener of your door intercom system will not open or only very briefly as the output current is much too low recommend a door opener with low power consumption in our office Shop to order or if you want to use your door opener, connect a decoupler relay (in the shop) to the internal voltage output of the doorbell station and to the relay then the circuit for the door opener

SH-45DNDF412

special door opener

SH-45ND412 Flex S

43Ohm and a power consumption at 12 V of 250mA

Suitable for direct connection to the door station of the VT or DT series.

Versorgung über den BUS der Anlage

- Electric strike
- incl. 2 mounting screws M4
- Symmetrical version = left or right
- Adjustable trap (FLEX)
- with manual release (mechanical day release)
XCHARX 250 mA / 12 V 43 Ohm

- Total length: 75 mm
- Depth: 28 mm
- Width: 20,5 mm
- Screw spacing: 52 mm

Door opener A5010FBDoor opener A5010FB

A5010 FB

Momentary contact 12 - 48 Volt AC / DC 36,00

Continuous operation 12 or 24 Volt AC / DC +/- 15%

  • Day setting (unlocking lever)

  • 3 mm adjustable

  • DL / DR universal

  • Case depth 6 mm

  • Clamping force 5.000 N

data

Door opener A5010Door opener A5010

A5010

with signal processor and power saving mode

  • Day setting (unlocking lever)

  • 3 mm adjustable

  • DL / DR universal

  • Case depth 6 mm

  • Clamping force 5.000 N

  • erzeugt Rasselgeräusch für 3s

data

Door opener remote controlDoor opener remote control

A5010-F

Continuous operation 12 Volt DC 108,00

with integrated radio receiver for max. 12 wireless key

  • Day setting (unlocking lever)

  • 3 mm adjustable

  • DL / DR universal

  • Case depth 6 mm

  • Clamping force 5.000 N

data

Door opener A500Door opener A500

A500-M

bluetooth compact door opener 12 Volt DC 193,00

with integrated bluetooth receiving module for up to 5 mobile phones

  • 3 mm adjustable

  • DL / DR universal

  • shunt

  • Case depth 6 mm

  • Clamping force 5.000 N

  • automatic unlocking when in range

data

Your door opener may have an internal power supply of 6-12 V max 300 mA. Order the D45NDF with us at the same time to your system. This opener is suitable for DT system

If they have a different door opener of the larger switching loads (> 1A) required they use an additional relay. Caution max Switch load voltage range 1A <24 V DC / AC not larger Use 1A Do not forget